• URD in CIC
Duct Materials
The duct shall be extruded from either medium density polyethylene type II, class C, category 5, or high density polyethylene type III, class C, category 5 as outlined in ASTM D1248.  Available in black or orange as shown.

Duct Dimensions
The following duct dimensions are recommended, however, Ð԰ɵ¼º½ will provide duct to customer's required dimensions when specified.


The cable shown in the illustration is
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Conduit
Size
(in)

Conduit
Outer
Diameter
(in)

Minimum
Wall
Thickness
(mls)

Bending
Radius
(in)

Max.
Cable
Diameter

Typical
Unjacketed
Cond. Size

Elongation
(%)

Melt
Index
Max

Brittleness
Temp.
ºC max.
Medium

Brittleness
Temp.
ºC max.
High

N/A 1 1/4 N/A 1.66 N/A 100 N/A 18 N/A 1.05 N/A #2 through 2/0 N/A 400 N/A .4 N/A -45º°ä N/A -75º°ä
N/A 1 1/2 N/A 1.90 N/A 115 N/A 21 N/A 1.20 N/A 1/0 through 250 N/A 400 N/A .4 N/A -45º°ä N/A -75º°ä
N/A 2 N/A 2.38 N/A 145 N/A 26 N/A 1.5 N/A 4/0 through 500 N/A 400 N/A .4 N/A -45º°ä N/A -75º°ä
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1