AerialGuard® Tangent Bracket Stirrup
AerialGuard® ACCESSORIES
AerialGuard® Tangent Bracket Stirrup
APPLICATIONS
The ST-001 stirrup is installed directly under the end of the tangent bracket to support any of the AerialGuard® spacers. The stirrup should be bolted to the underside of the tangent bracket using the pre-drilled holeclosest to the end of the bracket.
CONSTRUCTION
Carbon steel SAE 1010 to 1020 or modular cast iron - ABNT NBR 8650 -ABNT NBR 6916 - ABNT NBR 6593.Hot-dip galvanized (ASTM-153). The material used follows the SAE (Society of Automotive Engineers) standards, which are widely applied in the automotive, aerospace, and mobility industries.
FEATURES & BENEFITS
- Provides the point of attachment for the spacer.
- When using the "roll-by" installation method, the stirrup should be attached when the spacer is installed.
- Attachment bolt is provided.
| Item Number |
Mfg Item Number |
DIMENSIONS | Minimum Ultimate Load (lb) |
Weight (lb) |
|
| A (in) |
B (in) |
||||
| ST-001 | 407.437 | 5.47 | 2.76 | NOMINAL RESISTANCE: 450 NO PERMANENT DEFORMATION: 629 WITH PERMANENT DEFORMATION: 899 |
0.80 |
UPDATED 6/2025