AerialGuard® Angle Bracket

APPLICATIONS
Angle brackets are designed to support the covered conductors used in the AerialGuard® spacer cable system when the circuit makes a turn. They are affixed on the utility pole to maintain the spacer cable system configuration when creating line angles from 6 degrees to 90 degrees. The brackets accommodate the full range of AerialGuard® polymer insulators.

CONSTRUCTION
Carbon steel SAE 1010 to 1020 laminated. Hot-dip galvanized (ASTM A-153). The material used follows the SAE (Society of Automotive Engineers) standards, which are widely applied in the automotive, aerospace, and mobility industries.

FEATURES & BENEFITS

  • Cost-effective alternative to crossarm transitions.
  • Pre-drilled holes for insulators and standard 8” pre-drilled pole attachment.
  • Pole mounting is achieved using either 5/8” or ¾” through bolts or double arming bolts (not included).
  • Accepts Insulator plate when required on larger conductors or 61 to 90degree angles.
  • Predrilled ground lug mounting hole.
  • AerialGuard® brackets are interchangeable with other manufacturer's spacer cable systems.

 

Item Number Mfg Item Number System Voltage
 (kV)
DIMENSIONS MIN. YIELD LOAD Weight
(lb)
A
(in)
B
(in)
V1
(lb)
V2
(lb)
AB-15 409.874 15 kV
and
below
22.83 17.32
  • NOMINAL RESISTANCE: 450
  • NO PERMANENT DEFORMATION:  629
  • WITH PERMANENT DEFORMATION: 899
  • NOMINAL RESISTANCE: 225
  • NO PERMANENT DEFORMATION:  315
  • WITH PERMANENT DEFORMATION: 450 
16.52
AB-35 409.876 35 kV
and
below
25.20 19.48
  • NOMINAL RESISTANCE: 450
  • NO PERMANENT DEFORMATION:  629
  • WITH PERMANENT DEFORMATION: 899
  • NOMINAL RESISTANCE: 225
  • NO PERMANENT DEFORMATION:  315
  • WITH PERMANENT DEFORMATION: 450 
19.80






UPDATED jUNE 6, 2025